Table of Contents
Advertisement
Command Mode
Read-Write.
Example
This example shows how to add front panel Fast Ethernet ports 5 through 10 to the egress list of
VLAN 7. This means that these ports will transmit VLAN 7 frames
Matrix>set vlan egress 7 fe.0.5-10
7.3.4.4
clear vlan egress
Use this command to remove ports from one or more VLAN egress lists.
clear vlan egress vlan-list port-string
Syntax Description
vlan-list
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to remove Fast Ethernet port 1 on expansion module 3 from the egress list
of VLANs 2 and 9:
Matrix>clear vlan egress 2,9 fe.3.1
Specifies the VLAN(s) from which port(s) will be removed
from the egress list.
Specifies port(s) to remove from the VLAN egress list of
the specified vlan-id. For a detailed description of possible
port-string values, refer to
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
VLAN Configuration Command Set
Configuring the VLAN Egress List
:
Section
4.1.2.
7-21
Advertisement
Table of Contents
