Table of Contents
Advertisement
VLAN Configuration Command Set
Assigning VLANs According to Classification Rules
Table 7-3 Classification Precedence (Continued)
IPX Class of Service
IPX Type
Protocol Type (Ether Type or DSAP/SSAP)
Receive Port
7.3.5.5
clear vlan classification
Use this command to clear a VLAN classification entry.
clear vlan classification vlan-id data_meaning data _value [data_mask]
Syntax Description
vlan-id
data_meaning
data _value
data_mask
Command Defaults
Data masks are required only for classification types requiring a second
data_value. For details, refer to
Command Type
Switch command.
Command Mode
Read-Write.
7-34
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies the number of the VLAN associated with the
classification to be cleared.
Specifies the data_meaning of the classification to be
cleared. Refer to
Table 7-1
data_meanings and associated protocol types and
classifications.
Specifies the data_value of the classification to be cleared.
The range of values is dependent on the data_meaning.
Refer to
Table 7-1
and
(Not required for most data values.) This entry is dependent
on the data_value entered. For details, refer to
Table
7-2.
and
Table 7-2
for lists of the
Table 7-2
for the limitations.
8
9
10
11
Table
7-2.
Advertisement
Table of Contents
