Table of Contents
Advertisement
SNMP Command Set
Configuring SNMP Notification Parameters
Command Defaults
•
•
•
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create an SNMP notify filter called "noauthentication" with a MIB
subtree ID of 1, to include all management targets:
Matrix>set snmp notifyfilter noauthentication subtree 1 included
This example shows how to create an SNMP notify filter called "pilot1" with a MIB subtree ID of
1.3.6:
Matrix>set snmp notifyfilter pilot1 subtree 1.3.6
5.2.7.11 clear snmp notifyfilter
Use this command to delete an SNMP notify filter configuration.
clear snmp notifyfilter profile subtree oid
Syntax Description
profile
subtree oid
Command Defaults
None.
Command Type
Switch command.
5-58
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
If not specified, mask is set to 255.255.255.255
If not specified, subtree will be included.
If storage type is not specified, nonvolatile will be applied.
nonvolatile
Specifies an SNMP filter notify name to delete.
Specifies a MIB subtree containing the filter to be
deleted.
Advertisement
Table of Contents
