Example
This example shows how to enable policy profile 1 named netadmin. VLAN classification is
enabled for this policy on VLAN 1 and Class of Service classification is disabled for class 0:
Matrix>set policy profile 1 enable netadmin enable 1 disable 0
8.3.1.3
clear policy profile
Use this command to delete one or all policy profile entries.
clear policy profile profile-index | all
Syntax Description
profile-index
all
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete policy profile 8:
Matrix>clear policy profile 8
8.3.1.4
show policy invalid action
Displays information about the action the device will apply on an invalid or unknown policy, and,
if applicable, the invalid policy ID that was attempted during authentication.
show policy invalid action
Syntax Description
None.
Specifies the index number of the profile entry to be
deleted. Valid values are 1 to 65535.
Deletes all policy profile entries.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Policy Classification Configuration Command Set
Configuring Policy Profiles
8-5