Table of Contents
Advertisement
SNMP Command Set
Disabling / Enabling and Reviewing SNMP Statistics
Example
This example shows how to display SNMP status:
Matrix>show snmp
SNMP is currently enabled.
5.2.1.2
set snmp
Use this command to enable or disable SNMP management on the device.
set snmp {enable | disable}
Syntax Description
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable SNMP:
Matrix>set snmp disable
5.2.1.3
show snmp engineid
Use this command to display the SNMP local engine ID. This is the SNMP v3 engine's
administratively unique identifier.
show snmp engineid
Syntax Description
None.
Command Defaults
None.
5-6
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Enables or disables SNMP management.
Advertisement
Table of Contents
