Logging And Switch Network Management; Process Overview: Logging And Network Management - Enterasys 1G58x-09 Configuration Manual

Logging and Switch Network Management

This chapter describes switch-related logging and network management commands and how to use
them.
NOTE: The commands in this section pertain to network management of the Matrix E1
device when it is in switch mode only. For information on router-related network
management tasks, including reviewing router ARP tables and IP traffic, refer to
Chapter 12.
11.1 PROCESS OVERVIEW: LOGGING AND NETWORK
MANAGEMENT
Switch-related logging and network management tasks include the following:
•
Configuring System Logging
•
Monitoring Switch Network Events and Statistics
•
Managing Switch Network Addresses
•
Configuring Simple Network Time Protocol (SNTP)
•
Configuring Node Aliases
•
Configuring Convergence End Points (CEP) phone detection
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
(Section 11.2.1)
(Section
(Section 11.2.5)
(Section 11.2.2)
11.2.3)
(Section 11.2.4)
(Section
11
11.2.6)
11-1