Clear Spantree Priority - Enterasys 1G58x-09 Configuration Manual

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the bridge priority for SID 6 to 4096:
Matrix>set spantree priority 4096 6

6.2.1.17 clear spantree priority

Use this command to reset the bridge priority to the default value of 32768.
clear spantree priority [sid]
Syntax Description
sid
Command Defaults
If sid is not specified, all SIDs will be reset.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the bridge priority for SID 6:
Matrix>clear spantree priority 6
6-20 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
(Optional) Resets the bridge priority for a specific
Spanning Tree.