Set Policy Maptable - Enterasys 1G58x-09 Configuration Manual

Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the policy map table response configuration:
Matrix>clear policy maptable response

8.3.2.10 set policy maptable

Use this command to map returned VLAN tunnel attributes to a policy profile index. When VLAN
authorization is enabled (globally and on ports being authenticated, as described in
the policy map table can be used to authenticate a mapped policy profile index to a VLAN tunnel
attribute. If the policy maptable is zero for any VLAN entry, the maptable will not be used, and the
authentication will simply be to override the port VLAN for the duration of the authenticated
session.
set policy maptable vlan-list profile-index
Syntax Description
vlan-list
profile-index
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Specifies the VLAN(s) for which policy authentication
via a VLAN-to-policy mapping will be allowed.
Specifies the profile index number of the policy
classification to be authenticated. Valid values are 1 to
65535.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Section 8.3.2.7),
8-21