Syntax Description
vlan_id
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set VLAN 1 as an IGMP registered VLAN:
Matrix>set igmp mode vlan 1
10.2.4.3 set igmp mode ipaddress
Use this command to set the virtual IP address through which multicast traffic will be forwarded to
all subscribing, or "open" ports.
set igmp mode ipaddress ip_address
Syntax Description
ip_address
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Specifies the IGMP registered VLAN.
Specifies the virtual IP address associated with the
vlan_id used in the set igmp mode vlan command
(Section
10.2.4.2).
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
IGMP Configuration Command Set
Configuring IGMP VLAN Registration
10-11