Clear Ip Ospf Process - Enterasys 1G58x-09 Configuration Manual

Example
This example shows how to display OSPF virtual links information:
Matrix>Router#show ip ospf virtual-links
Virtual Link to router 5.5.5.1, is UP
Transit area 0.0.0.2,via interface Vlan 7, Cost of using 10
Transmit Delay is 1 sec(s), State POINT_TO_POINT
Timer intervals configured:
Adjacency State FULL
Table 13-6
Table 13-6 show ip ospf virtual links Output Details
Output
Virtual Link
Transit area
via interface
Cost of using
Transit Delay
State
Timer intervals
configured
Adjacency State

13.1.2.29clear ip ospf process

Use this command to reset the OSPF process. This will require adjacencies to be reestablished and
routes to be reconverged.
clear ip ospf process process-id
Hello 10, Dead 40, Wait 40, Retransmit 5
provides an explanation of the command output.
What It Displays...
ID of the virtual link neighbor, and the virtual link status,
which is up or down.
ID of the transit area through which the virtual link is
configured.
Router's interface into the transit area.
OSPF cost of routing through the virtual link.
Time (in seconds) added to the LSA (Link State
Advertisement) age field when the LSA is transmitted
through the virtual link.
Interface state assigned to a virtual link, which is
point-to-point.
Timer intervals configured for the virtual link, including
Hello, Dead, Wait, and Retransmit intervals.
State of adjacency between this router and the virtual link
neighbor of this router.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Process Overview: Routing Protocol Configuration
Configuring OSPF
13-61