Table of Contents
Advertisement
14.3 SECURITY CONFIGURATION COMMAND SET
14.3.1 Configuring RADIUS
Purpose
To perform the following:
•
Review the RADIUS client/server configuration on the device.
•
Enable or disable the RADIUS client.
•
Set local and remote login options.
•
Set primary and secondary server parameters, including IP address, timeout period, and number
of user login attempts allowed.
•
Reset RADIUS server settings to default values.
•
Configure a RADIUS accounting server.
Commands
The commands needed to review and configure RADIUS are listed below and described in the
associated section as shown:
•
show radius
(Section
•
set radius
(Section
•
clear radius
(Section
•
show radius accounting
•
set radius accounting
•
clear radius accounting
For an overview on working with Host Access Control Authentication (HACA), refer to
Section
14.4.1.
14.3.1.1)
14.3.1.2)
14.3.1.3)
(Section
14.3.1.4)
(Section
14.3.1.5)
(Section
14.3.1.6)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Security Configuration Command Set
Configuring RADIUS
14-3
Advertisement
Table of Contents
