Table of Contents
Advertisement
SNMP Command Set
Configuring SNMP Users, Groups and Communities
5.2.2.7
show community
Use this command to display SNMPv1 and v3 community names and access policies. In SNMPv1
and v2, community names act as passwords to remote SNMP management. Access is controlled by
enacting either of two levels of security authorization (Read-Only or Read-Write).
show community
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display community names and access policies:
Matrix>show community
------------------
Table 5-6
set community command to assign variables, refer to
Table 5-6 show community Output Details
Output
Community Name Name through which a user will access SNMP management.
Permissions
5-22
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Community Name
Public
Private
provides an explanation of the command output. For details on using the
What It Displays...
Access policy granted to each community name, either ro
(Read-Only) or rw (Read-Write).
Permissions
-----------
Read-Write
Read-Write
Section
5.2.2.11.
Advertisement
Table of Contents
