Table of Contents
Advertisement
General Configuration Command Set
Managing Switch Configuration Files
3.2.5.5
copy
Use this command to upload or download a configuration file.
copy source destination
The options for using this syntax are:
•
•
•
NOTES: The switch IP address, dip switch, and event log settings will not be affected
by the download of a configuration file from another Matrix E1 switch.
If the file being downloaded is a text configuration file, then commands from the file will
be set on the receiving device, including IP addresses.
Syntax Description
source
destination
filename
device-config
tftp:[[[//url/
directory/
filename
append
3-64
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
copy filename1 filename2
copy {filename device-config} tftp:[[[//url/directory/filename]
copy tftp:[[[//url]/directory]/filename] {filename | device-config} [append]
Specifies the source file to copy. Options are
device-config, a filename, or the URL of a TFTP server.
(See individual descriptions below.)
Specifies the destination where the file will be copied.
Options are device-config, a filename, or the URL of a
TFTP server. (See individual descriptions below.)
Specifies the source file to copy or the destination where
the file will be copied to the NVDRIVE: file system.
Creates and uploads a text configuration file, or specifies
the destination for a text configuration file.
Specifies the TFTP server IP address and directory where
the source or destination file is located, and the name of the
file being copied or overwritten.
(Optional) Adds the CLI commands from the specified file
without resetting the device. This option is only valid when
the device-config keyword is used.
Advertisement
Table of Contents
