Table of Contents
Advertisement
Security Configuration Command Set
Configuring MAC Locking
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove statically locked MACs from Fast Ethernet front panel port 3:
Matrix>clear maclock static fe.0.3
14.3.4.10show maclock autostatic
Use this command to display the status of the MAC locking autostatic function on one or more
ports.
show maclock autostatic [port port-string]
Syntax Description
port port-string
Command Defaults
If port-string is not specified, the status of the MAC locking autostatic function
will be displayed for all ports, as well as the public ingress and egress VLANs and
public MAC address configured for the autostatic function.
Command Type
Switch command.
Command Mode
Read-Only.
14-54
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
(Optional) Displays the status of the MAC locking
autostatic function on specified port(s). For a detailed
description of possible port-string values, refer to
Section
4.1.2.
Advertisement
Table of Contents
