Table of Contents
Advertisement
9.3.4.4
clear priority classification
Use this command to clear priority classification entries.
clear priority classification priority_value data_meaning data_value
[data_mask]
Syntax Description
priority_value
data_meaning
data _value
data_mask
Command Defaults
Data masks are required only for classification types requiring a second
data_value. For details, refer to
Command Type
Switch command.
Command Mode
Read-Write.
Command Alternative (v2.05.xx and higher)
clear policy class
Example
This example shows how to remove the Ethernet II Type IP classification rule from port priority 7:
Matrix>clear priority classification 7 ethernet-II-type IP
Port Priority and Classification Configuration Commands
Specifies a port priority (0 through 7) associated with the
classification to be cleared.
Specifies the data_meaning of the classification to be
cleared. Refer to
numbers and associated protocol types and
classifications.
Specifies the data_value of the classification to be
cleared. The range of values is dependent on the
data_meaning. Refer to
(Optional for most data values) Specifies a value
dependent on the data_value entered. For details, refer to
Table
9-1.
Table
(Section
8.3.2.4)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Configuring Priority Classification
Table 9-1
for the list of data_meaning
Table 9-1
9-1.
for the limitations.
9-23
Advertisement
Table of Contents
