Table of Contents
Advertisement
14.3.2.8 set eapol
Use this command to enable or disable EAPOL port-based user authentication with the RADIUS
server and to set the authentication mode for one or more ports.
set eapol [enable | disable | auth-mode {auto | forced-authorized |
forced-unauthorized} port-string
Syntax Description
enable | disable
auth-mode auto |
forced-
authorized |
forced-
unauthorized
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
When enabled, auth-mode defaults to auto.
Command Alternatives (v3.xx.xx and higher)
•
•
Enables or disables EAPOL.
Specifies the authorization mode as:
•
•
•
Specifies the port(s) on which to set EAPOL parameters.
For a detailed description of possible port-string values,
refer to
set dot1x
(Section
14.3.2.3)
set dot1x auth-config authcontrolled-portcontrol
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
auto - Auto authorization mode. This is the default mode
and will forward frames according to the authentication
state of the port. For details on this mode, refer to
Table
14-2.
forced-authorized - Forced authorized mode, which
disables authentication on the port.
forced-unauthorized - Forced unauthorized mode,
which filters and discards all frames received on the port.
Section
4.1.2.
Security Configuration Command Set
Configuring 802.1X Authentication
(Section
14.3.2.4)
14-29
Advertisement
Table of Contents
