Table of Contents
Advertisement
Table 11-1 show logging all Output Details (Continued)
Output
Facility
Severity
Description
Port
Status
11.2.1.3 show logging console
Use this command to display the global logging state and the severity level at which logging
messages will display to the console port.
show logging console
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This command shows how to display console logging settings. In this case, logging is globally
enabled and the severity level is set to 8 so that debugging level messages will be shown on the
console. For an explanation of the command output, refer back to
Matrix>show logging console
Global Logging State: Enabled
Logging console session: debugging(8)
What It Displays...
Syslog facility that will be encoded in messages sent to this
server. Valid values are: local0 to local7.
Severity level at which the server is logging messages.
Text string description of this facility/server.
UDP port the client uses to send to the server.
Whether or not this Syslog configuration is currently
enabled or disabled.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Table
Configuring System Logging
11-1.
11-7
Advertisement
Table of Contents
