Clear Snmp Targetparams - Enterasys 1G58x-09 Configuration Manual

5.2.5.3

clear snmp targetparams

Use this command to delete an SNMP target parameter configuration.
clear snmp targetparams targetparams
Syntax Description
targetparams
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear SNMP target parameters named "v1ExampleParams":
Matrix>clear snmp targetparams v1ExampleParams
Specifies the name of the parameter in the SNMP target
parameters table to be cleared.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
SNMP Command Set
Configuring SNMP Target Parameters
5-41