Table of Contents
Advertisement
Process Overview: Routing Protocol Configuration
Configuring OSPF
Syntax Description
area-id
simple
message-digest
Command Syntax of the "no" Form
The "no" form of this command disables authentication for an OSPF area:
no area area-id authentication {simple | message-digest}
Command Type
Router command.
Command Mode
Router configuration: Matrix>Router(config-router)#
Command Defaults
None.
Example
This example shows how to enable MD5 authentication on OSPF area 10.0.0.0:
Matrix>Router(config)#router ospf 1
Matrix>Router(config-router)#area 10.0.0.0 authentication message-digest
13.1.2.16area stub
Use this command to define an OSPF area as a stub area. This is an area that carries no external
routes.
area area-id stub [no-summary]
13-42
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies the OSPF area in which to enable authentication.
Valid values are decimal values or IP addresses.
Enables simple text authentication. Simple password
authentication allows a password (key) to be configured per
area. Routers in the same area that want to participate in the
routing domain will have to be configured with the same
key.
Enables MD5 authentication on the OSPF area indicated by
the area-id.
Advertisement
Table of Contents
