Logging and Network Management Command Set
Monitoring Switch Network Events and Status
11.2.2.3 history
Use this command to display the contents of the command history buffer. The command history
buffer includes all the switch commands entered up to a maximum of 32, as specified in the set
history command
(Section
history
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the contents of the command history buffer. It shows there are
five commands in the buffer:
Matrix>history
1 show arp
2 history
3 show ip
4 show cdp fe.0.1
5 history
11.2.2.4 repeat
Use this command to repeat a command shown in the command history buffer.
repeat [cmd_num] [iterations]
11-24
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.2.6).