Process Overview: Routing Protocol Configuration
Configuring IRDP
13.1.4 Configuring IRDP
Purpose
To enable and configure the ICMP Router Discovery Protocol (IRDP) on an interface. This protocol
enables a host to determine the address of a router it can use as a default gateway.
Commands
The commands needed to enable and configure IRDP are listed below and described in the
associated section as shown:
•
ip irdp
(Section
•
ip irdp maxadvertinterval
•
ip irdp minadvertinterval
•
ip irdp holdtime
•
ip irdp preference
•
ip irdp address
(Section
•
no ip irdp multicast
•
show ip irdp
(Section
13.1.4.1 ip irdp
Use this command to enable or disable IRDP on an interface.
ip irdp
Syntax Description
None.
Command Syntax of the "no" Form
The "no" form of this command disables IRDP on an interface:
no ip irdp
Command Type
Router command.
13-68
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
13.1.4.1)
(Section
13.1.4.2)
(Section
13.1.4.3)
(Section
13.1.4.4)
(Section
13.1.4.5)
13.1.4.6)
(Section
13.1.4.7)
13.1.4.8)