Clear Hostdos-Counters - Enterasys 1G58x-09 Configuration Manual

14.3.8.3 clear hostdos-counters

Use this command to clear Denial of Service security counters.
clear hostdos-counters
ROUTER: This command can be executed when the device is in router mode only.
For details on how to enable router configuration modes, refer to
Syntax Description
None.
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router(config)#
Command Defaults
None.
Example
This example shows how to clear Denial of Service security counters:
Matrix>Router(config)#clear hostdos-counters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Security Configuration Command Set
Configuring Denial of Service Prevention
Section 3.3.3.
14-101