Table of Contents
Advertisement
SNMP Command Set
Configuring SNMP Users, Groups and Communities
Example
This example shows how to remove the SNMP user named "bill":
Matrix>clear snmp user bill
5.2.2.4
show snmp group
Use this command to display an SNMP group configuration. An SNMP group is a collection of
SNMPv3 users who share the same access privileges.
show snmp group [groupname] [user user] [security-model {v1 | v2 | v3}]
Syntax Description
groupname
groupname
user user
security-model v1 |
v2 | v3
Command Defaults
•
•
•
Command Type
Switch command.
Command Mode
Read-Only.
5-18
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
(Optional) Displays information for a specific SNMP
group.
(Optional) Displays information about users within the
specified group.
(Optional) Displays information about groups assigned to
a specific security SNMP model.
If groupname is not specified, information about all SNMP groups will be
displayed.
If user is not specified, information about all SNMP users will be displayed.
If security-model is not specified, user information about all SNMP versions
will be displayed.
Advertisement
Table of Contents
