Table of Contents
Advertisement
Syntax Description
enable | disable
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable the node alias agent on Fast Ethernet front panel port 3
Matrix>set nodealias disable fe.0.3
11.2.5.4 set nodealias maxentries
Use this command to set the maximum number of node alias entries allowed for one or more ports.
set nodealias maxentries val port-string
Syntax Description
val
port-string
Command Defaults
None.
Enables or disables a node alias agent.
Specifies the port(s) on which to enable or disable a node
alias agent. For a detailed description of possible
port-string values, refer to
Specifies the maximum number of alias entries. Valid
values are 1 - 4096.
Specifies the port(s) on which to set the maximum entry
value. For a detailed description of possible port-string
values, refer to
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Section
Section
4.1.2.
Configuring Node Aliases
4.1.2.
:
11-71
Advertisement
Table of Contents
