Table of Contents
Advertisement
IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
Example
This example shows output from a successful ping to IP address 182.127.63.23:
Matrix>Router#ping 182.127.63.23
Reply from 182.127.63.23
Reply from 182.127.63.23
Reply from 182.127.63.23
------ PING 182.127.63.23 : Statistics ------
3 packets transmitted, 3 packets received, 0% packet loss
This example shows output from an unsuccessful ping to IP address 182.127.63.24:
Matrix>Router#ping 182.127.63.24
Timed Out
Timed Out
Timed Out
------ PING 182.127.63.24 : Statistics ------
3 packets transmitted, 0 packets received, 100% packet loss
12.2.5.9 traceroute
Use this command to display a hop-by-hop path through an IP network from the device to a
specific destination host. Three ICMP probes will be transmitted for each hop between the source
and the traceroute destination.
traceroute host
Syntax Description
host
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
None.
12-36
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies a host to which the route of an IP packet will be
traced.
Advertisement
Table of Contents
