Table of Contents
Advertisement
Logging and Network Management Command Set
Configuring System Logging
11.2.1.13clear logging application
Use this command to reset the logging severity level for one or all applications to the default value
of 5 (warning conditions).
clear logging application {mnemonic | all}
Syntax Description
mnemonic
all
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the logging severity level for SSH:
Matrix>clear logging application SSH
11.2.1.14show logging audit-trail
Use this command to display the contents of a logging audit trail file. This will be a record of all
events that occur when users request and use specific system resources. The device can store up to
200 messages.
show logging audit-trail [file]
Syntax Description
file
11-20
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Resets the severity level for a specific application. Valid
mnemonic values and their corresponding applications are
listed in
Table
11-3.
Resets the severity level for all applications.
(Optional) Displays a specific audit-trail log file.
Advertisement
Table of Contents
