Security Configuration Command Set
Configuring MAC Authentication
14.3.3.9 set macauthentication portreauthenticate
Use this command to force an immediate reauthentication of the currently active sessions on one or
more MAC authentication ports.
set macauthentication portreauthenticate [port-string]
Syntax Description
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, all MAC authentication ports will be forced to
reauthenticate.
Example
This example shows how to force Fast Ethernet front panel ports 1 through 5 to reauthenticate:
Matrix>set macauthentication portreauthentication fe.0.1-5
14.3.3.10set macauthentication macreauthenticate
Use this command to force an immediate reauthentication of a MAC address.
set macauthentication macreauthenticate mac_addr
Syntax Description
mac_addr
Command Type
Switch command.
Command Mode
Read-Write.
14-40
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
(Optional) Forces reauthentication of specific MAC
authentication port(s). For a detailed description of possible
port-string values, refer to
Specifies the MAC address of the session to reauthenticate.
Section
4.1.2.