Show Macauthentication Session - Enterasys 1G58x-09 Configuration Manual

Security Configuration Command Set
Configuring MAC Authentication

14.3.3.2 show macauthentication session

Use this command to display the active MAC authenticated sessions on one or more ports.
show macauthentication session [port-string]
Syntax Description
port-string
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC session information will be displayed for all
MAC authentication ports.
Example
This example shows how to display MAC session information for Fast Ethernet front panel port 2:
Matrix>show macauthentication session fe.0.2
Port MAC Address
----- -----------------
fe.0.2 00-60-97-b5-4c-07
Table 14-4
Table 14-4 show macauthentication session Output Details
Output
Port
MAC Address
Duration
14-34 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
(Optional) Displays active MAC authenticated sessions for
specific port(s). For a detailed description of possible
port-string values, refer to
Duration
---------- -------------
525
provides an explanation of the command output.
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
MAC address associated with the session.
Time, in seconds, this session has been active.
Section
Reauth Period
3600
Section
4.1.2.
Reauthentications
-----------------
disabled
4.1.2.