Table of Contents
Advertisement
Example
This example shows how to create a MAC locking association between MAC address
00-a0-c9-0d-32-11 and Fast Ethernet front panel port 3:
Matrix>set maclock 00-a0-c9-0d-32-11 fe.0.3 create
14.3.4.6 set maclock firstarrival
Use this command to restrict MAC locking on a port to a maximum number of end station addresses
first connected to that port.
set maclock firstarrival port-string value
Syntax Description
port-string
value
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to restrict MAC locking to 6 MAC addresses on Fast Ethernet front panel
port 3:
Matrix>set maclock firstarrival fe.0.3 6
Specifies the port on which to limit MAC locking. For a
detailed description of possible port-string values, refer
to
Section
4.1.2.
Specifies the number of first arrival end station MAC
addresses to be allowed connections to the port. Valid
values are 0 to 600.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Security Configuration Command Set
Configuring MAC Locking
14-51
Advertisement
Table of Contents
