Table of Contents
Advertisement
General Configuration Command Set
Setting Basic Device Properties
Command Alternative (v3.00.xx and previous)
set system baud rate
Example
This example shows how to set the console port baud rate to 19200:
Matrix>set console baud 19200
3.2.2.22 show ip address
Use this command to display the local host port IP address, system mask and default gateway.
show ip address
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the system IP address, the system mask and the default
gateway:
Matrix>show ip address
System IP
System Mask
Default Gateway - 0.0.0.0
3-48
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
- 10.1.10.1
- 255.255.128.0
Advertisement
Table of Contents
