Table of Contents
Advertisement
Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA quiet period to 30 seconds for Fast Ethernet front panel
ports 5-7:
Matrix>set pwa quietperiod 30 fe.0.5-7
14.3.5.15set pwa maxrequests
Use this command to set the maximum number of log on attempts allowed before transitioning the
PWA port to a held state.
set pwa maxrequests requests [port-string]
Syntax Description
requests
port-string
Command Defaults
If port-string is not specified, maximum requests will be set for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA maximum requests to 3 for all ports:
Matrix>set pwa maxrequests 3
14-76
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies the maximum number of log on attempts.
(Optional) Sets the maximum requests for specific
port(s). For a detailed description of possible port-string
values, refer to
Section
4.1.2.
Advertisement
Table of Contents
