Table of Contents
Advertisement
Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14.3.5.9 set pwa enhancedmode
Use this command to enable or disable PWA enhanced mode. When enabled, users on
unauthenticated PWA ports can type any URL into a browser and be presented the PWA login page
on their initial web access. They will also be granted guest networking privileges.
NOTE: In order for PWA enhanced mode to operate, PWA port control mode must be
set to auto as described in
set pwa enhancedmode {enable | disable}
Syntax Description
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable PWA enhanced mode:
Matrix>set pwa enhancedmode enable
14-72
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Section
14.3.5.16.
Enables or disables PWA enhanced mode.
Advertisement
Table of Contents
