Clear Snmp User - Enterasys 1G58x-09 Configuration Manual

•
•
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create a new SNMP user named "netops" with MD5 authentication and
privacy encryption:
Matrix>set snmp user netops authentication md5 privacy
Matrix>Enter authentication password>***********
Matrix>Reenter authentication password>***********
Matrix>Enter privacy password>***********
Matrix>Reenter privacy password>***********
5.2.2.3

clear snmp user

Use this command to remove a user from the SNMPv3 security-model list.
clear snmp user user [remote remote]
Syntax Description
user
remote remote
Command Defaults
If remote is not specified, the user will be removed from the local SNMP engine.
Command Type
Switch command.
Command Mode
Read-Write.
If remote is not specified, the user will be registered for the local SNMP
engine.
If storage type is not specified, nonvolatile will be applied.
Specifies an SNMPv3 user to remove.
(Optional) Removes the user from a specific remote
SNMP engine.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Configuring SNMP Users, Groups and Communities
SNMP Command Set
5-17