Table 4-3 show port counters Output Details
Output
Port
Bridge Port
MIB2 Interface
Counters
802.1Q Switch
Counters
4.3.1.3
clear port counters
Use this command to clear port counter statistics for one or more ports.
clear port counters [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, counter statistics will be cleared for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to clear all counter statistics for Fast Ethernet front port panel 42:
Matrix>clear port counters fe.0.42
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
Spanning Tree bridge port designation.
MIB2 network traffic counts.
Counts of frames received and transmitted.
(Optional) Clears counter statistics for specific port(s). For
a detailed description of possible port-string values, refer to
Section
4.1.2.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Port Configuration Command Set
Reviewing Port Status
Section
4.1.2.
4-11