Table of Contents
Advertisement
Command Alternative (v2.05.xx and higher)
clear policy class
Example
This example shows how to clear the Ethernet II Type IP classification rule associated with
VLAN 7:
Matrix>clear vlan classification 7 ethernet-II-type ip
7.3.5.6
set vlan classification ingress
Use this command to add ports to a VLAN classification rule. Ports added will now be active for
this rule. Untagged frames received will be tagged according to the VLAN classification rule.
set vlan classification ingress vlan-id port-string data_meaning data_value
[data_mask]
Syntax Description
vlan-id
port-string
data_meaning
data _value
data_mask
Command Defaults
Data masks are required only for classification types requiring a second
data_value. For details, refer to
Assigning VLANs According to Classification Rules
(Section
8.3.2.4)
Specifies the number of the VLAN that will be associated
with the new classification.
Specifies the port(s) to add to the new classification rule.
For a detailed description of possible port-string values,
refer to
Section
Specifies the data_meaning for the parameter used to
classify or filter frames. Refer to
for lists of the data_meanings and associated protocol
types and classifications.
Specifies the code of a predefined classifier. The range of
values is dependent on the data_meaning. Refer to
Table 7-1
and
(Not required for most data values.) This entry is
dependent on the data_value entered. For details, refer to
Table
7-2.
Table
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
VLAN Configuration Command Set
4.1.2.
Table 7-1
Table 7-2
for the limitations.
7-2.
and
Table 7-2
7-35
Advertisement
Table of Contents
