Table of Contents
Advertisement
3.2.2.23 set ip address
Use this command to set the system IP address, subnet mask and default gateway.
set ip address ip_address [mask ip_mask] [gateway ip_gateway]
Syntax Description
ip_address
mask ip_mask
gateway
ip_gateway
Command Defaults
If not specified, ip_mask and ip_gateway will not be changed.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the host port IP address to 10.1.10.1 with a mask of 255.255.128.0
and a default gateway of 10.1.0.1:
Matrix>set ip address 10.1.10.1 mask 255.255.128.0 gateway 10.1.10.1
Specifies the IP address to set for the device.
(Optional) Specifies the IP mask of the local host.
(Optional) Specifies the default gateway of the local host.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
General Configuration Command Set
Setting Basic Device Properties
3-49
Advertisement
Table of Contents
