Table of Contents
Advertisement
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the number of SSH authentication attempts allowed to 1
Matrix>set ssh passwordguesses 1
14.3.6.11set ssh logingracetime
Use this command to set the time interval for an SSH client to authenticate.
set ssh logingracetime value
Syntax Description
value
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the SSH login grace time to 120 seconds (2 minutes):
Matrix>set ssh logingracetime 120
14.3.6.12clear ssh keys
Use this command to regenerate new SSH authentication keys.
clear ssh keys
Specifies the number of seconds the client will be allowed
to authenticate. Valid values are from 15 to 600. Default is
60.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Security Configuration Command Set
Configuring Secure Shell (SSH)
:
14-87
Advertisement
Table of Contents
