Table of Contents
Advertisement
3.2.2.1
show system resources
Use this command to display the CPU type, NVRAM installed and other resources installed in the
system.
show system resources
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display system resources:
Matrix>show system resources
Cpu Type :
Local Memory Installed :
Local Memory Used :
Installed NVRAM :
Used NVRAM :
Installed Flash :
Used Flash :
Switch Load :
Switch Peak Load :
Switch Peak Load Time :
MPC8245
300 MHz
64 MB
56015752 Bytes
1024 kB
902144 Bytes
8192 kB
6580072 Bytes
0%
0%
3 days, 7 hours, 23 minutes, 6 seconds
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
General Configuration Command Set
Setting Basic Device Properties
3-31
Advertisement
Table of Contents
