Set Dot1X Auth-Config - Enterasys 1G58x-09 Configuration Manual

14.3.2.4 set dot1x auth-config

Use this command to configure 802.1X authentication.
set dot1x auth-config {[authcontrolled-portcontrol {auto | forced-auth |
forced-unauth}] [keytxenabled {false | true}] [maxreq value] [quietperiod
value] [reauthenabled {false | true}] [reauthperiod value] [servertimeout
timeout] [supptimeout timeout] [txperiod value]} port-string
Syntax Description
authcontrolled-
portcontrol auto |
forced-auth |
forced-unauth
keytxenabled
false | true
maxreq value
quietperiod value
reauthenabled
false | true
reauthperiod
value
servertimeout
timeout
Specifies the EAPOL port control mode as:
•
auto - Auto authorization mode. This is the default mode
and will forward frames according to the authentication
state of the port. For details on this mode, refer to
Table 14-2.
•
forced-auth - Forced authorized mode, which disables
authentication on the port.
•
forced-unauth - Forced unauthorized mode, which
filters and discards all frames received on the port.
Enables (true) or disables (false) 802.1X key transmission.
Specifies the maximum number of authentictation requests
allowed. Valid values are 1 - 2147483647.
Specifies the time (in seconds) following a failed
authentication before another attempt can be made. Valid
values are 1 - 2147483647.
Enables (true) or disables (false) reauthentication control.
Specifies the time lapse (in seconds) between attempts to
reauthenticate a port. Valid values are 1 - 2147483647.
Specifies a timeout period (in seconds) for the
authentication server. Valid values are 1 - 2147483647.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Security Configuration Command Set
Configuring 802.1X Authentication
14-21