Table of Contents
Advertisement
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet front panel port 11 as an edge port:
Matrix>set spantree adminedge fe.0.11 true
6.2.2.13 clear spantree adminedge
Use this command to reset the edge port status for one or more Spanning Tree ports to the default
value of false.
clear spantree adminedge [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, edge port status will be reset for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset Fast Ethernet front panel port 24 as a non-edge port:
Matrix>clear spantree adminedge fe.0.24
6.2.2.14 show spantree spanguard
Use this command to display the status of the Spanning Tree span guard function.
show spantree spanguard
Reviewing and Setting Spanning Tree Port Parameters
(Optional) Resets edge port status for specific port(s). For a
detailed description of possible port-string values, refer to
Section
4.1.2.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree Configuration Command Set
6-47
Advertisement
Table of Contents
