Table of Contents
Advertisement
This chapter describes factory default settings and the Startup and General Configuration set of
commands.
3.1
STARTUP AND GENERAL CONFIGURATION SUMMARY
At startup, the Matrix E1 device is configured with many defaults and standard features. The
following sections provide information on how to review and change factory defaults, how to
customize basic system settings to adapt to your work environment, and how to prepare to run the
device in router mode.
3.1.1
Factory Default Settings
The following tables list factory default device settings available on the Matrix E1.
default settings for basic operation and for when the device is in switch mode.
settings for router mode operation.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation
Device Feature
802.1X
CDP (Enterasys)
Discovery Protocol
CDP interval
Cisco Discovery
Protocol
DNS
Community name
Startup and General Configuration
Default Setting
Disabled.
Auto enabled on all ports.
Transmit frequency of CDP messages set to 60 seconds.
Disabled.
Enabled.
Public.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3
Table 3-1
lists
Table 3-2
lists default
3-1
Advertisement
Table of Contents
