Table of Contents
Advertisement
5.2.2.1
show snmp user
Use this command to display information about users. These are people registered to access SNMP
management.
show snmp user [user [remote remote]]
Syntax Description
user
remote remote
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display information for the SNMP "guest" user:
Matrix>show snmp user guest
--- SNMP user information ---
EngineId:
Username
Auth protocol
Privacy protocol
Storage type
Row status
Table 5-4
(Optional) Displays information about a specific user.
(Optional) Displays information about users on a specific
remote SNMP engine.
If user is not specified, information about all SNMP users will be displayed.
If remote is not specified, user information about the local SNMP engine will
be displayed.
00:00:00:63:00:00:00:a1:00:00:00:00
shows a detailed explanation of the command output.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Configuring SNMP Users, Groups and Communities
= Guest
= usmNoAuthProtocol
= usmNoPrivProtocol
= nonVolatile
= active
SNMP Command Set
5-15
Advertisement
Table of Contents
