Table of Contents
Advertisement
General Configuration Command Set
Managing Switch Configuration Files
Example
This example shows how to display contents of the NVDRIVE: file directory:
Matrix>dir
Filename
------------------------
CLITXT.CFG
3.2.5.2
show config
Use this command to display the contents of the CLI text configuration file.
show config [filename [all | system] [facility]]
Syntax Description
filename
all
system
facility
Command Type
Switch command.
Command Mode
Read-only.
Command Defaults
•
•
•
3-58
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Filesize
480
(Optional) Displays a specific file. The filename extension
must be .cfg
(Optional) Displays the entire configuration file.
(Optional) Displays only the CLI commands from the
configuration file.
(Optional) Displays the configuration for a specific facility.
For example, show config spantree would display only the
non-default Spanning Tree configuration.
If filename is not specified, the current CLI set commands will be regenerated
and spooled to the console.
If all or system are not specified with a filename, the entire configuration file
will be displayed.
If a facility is not specified, configurations for all known facilities will be
displayed.
Advertisement
Table of Contents
