Table of Contents
Advertisement
8.3.2.5
show policy maptable
Use this command to display policy-to-VLAN mapping information. When VLAN authorization is
enabled both globally and for the authenticated port, the policy map table can be used to assign a
policy using the VLAN provided in the VLAN tunnel attributes.
show policy maptable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display policy to VLAN mapping information. In this case, RADIUS
authentication is configured to authenticate according to policy profile ID. Policy profile 2 is
assigned to authenticate for VLANs 3 and 4, and policy profile 1 is assigned to authenticate for
VLAN 6:.
Matrix>show policy maptable
Policy map response:
Policy Mappings
---------------
Policy map last changed at sysUpTime:
VLAN Id
-------
3
4
6
policyProfile
Policy Profile Index
--------------------
2
2
1
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
0
days 00:07:34
8-17
Advertisement
Table of Contents
