Table of Contents
Advertisement
11.2.3.19set dns server
Use this command to add a server to the DNS server list.
set dns server ip-address
Syntax Description
ip-address
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to add the server at IP address 134.141.92.37 to the DNS server list:
Matrix>set dns server 134.141.92.37
11.2.3.20clear dns server
Use this command to remove a server from the DNS server list.
set dns server ip-address
Syntax Description
ip-address
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Specifies an IP address of a DNS server.
Specifies an IP address of a DNS server.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Managing Switch Network Addresses
11-51
Advertisement
Table of Contents
