Table of Contents
Advertisement
Physical Port Configuration Menu Screen
3.8
PHYSICAL PORT CONFIGURATION MENU SCREEN
The Physical Port Configuration Menu screen contains two menu items that allow the user to
access the Port Framer Configuration screen and the ATM Port Redundancy Configuration screen.
To access the Physical Port Configuration Menu screen, perform the following steps:
1. Use the arrow keys to highlight the PHYSICAL PORT CONFIGURATION menu item from
the ATM Screen.
2. Press ENTER. The Physical Port Configuration Menu screen,
Figure
3-10, displays.
Figure 3-10 Physical Port Configuration Menu Screen
The following list explains each of the Physical Port Configuration Menu screen fields:
PORT FRAMER CONFIGURATION
This menu item opens the Port Framer Configuration Screen. This screen is used to enable or
disable ATM statistics and alarms, and to specify, if applicable, the transmission type of the APIM.
For details, refer to
Section
3.9.
ATM PORT REDUNDANCY
This menu item opens the ATM Port Redundancy Configuration screen. This screen is used to
configure the APIMs for redundancy in the event the primary APIM becomes disabled. For details,
refer to
Section
3.10.
Local Management
3-27
Advertisement
Table of Contents
