Table of Contents
Advertisement
Port Configuration Command Set
Configuring Static Port Trunking
4.3.11.2 set trunkmode
Use this command to toggle the trunking mode on the device from the default (802.3ad) to port
trunking, which allows the device to recognize statically created port trunks.
set trunkmode {8023ad | porttrunking}
Syntax Description
8023ad
porttrunking
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how enable port trunking mode on the device:
Matrix>set trunkmode porttrunking
4.3.11.3 set trunk
Use this command to create, enable or disable a trunk when the device is set to port trunking mode.
set trunk trunk_name {create | disable | enable}
Syntax Description
trunk_name
create | disable |
enable
Command Defaults
None.
4-54
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Enables 802.3ad link aggregation mode.
Enables manual port trunking mode.
Specifies the name of the trunk port to be created,
disabled or enabled.
Creates, disables or enables a trunk with the specified
name.
Advertisement
Table of Contents
