Table of Contents
Advertisement
SNMP Command Set
Configuring SNMP Users, Groups and Communities
5.2.2.5
set snmp group
Use this command to create an SNMP group. This associates SNMPv3 users to a group that shares
common access privileges.
set snmp group groupname user user security-model {v1 | v2 | v3} [volatile |
nonvolatile]
Syntax Description
groupname
user user
security-model v1 |
v2 | v3
volatile |
nonvolatile
Command Defaults
If storage type is not specified, nonvolatile storage will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create an SNMP group called "anyone", assign a user named "public"
and assign SNMPv3 security to the group:
Matrix E7(rw)->set snmp group anyone user public security-model v3
5-20
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies an SNMP group name to create.
Specifies an SNMPv3 user name to assign to the group.
Specifies an SNMP security model to assign to the group.
(Optional) Specifies a storage type for SNMP entries
associated with the group.
Advertisement
Table of Contents
