Table of Contents
Advertisement
General Configuration Command Set
Setting Basic Device Properties
Table 3-5 show version Output Details
Output
Slot
Ports
Model
Serial Number
HW Version
FW Version
3.2.2.10 set system name
Use this command to configure a name for the system.
set system name ["name_string"]
Syntax Description
name_string
Command Defaults
If name_string is not specified, the system name will be set to a blank string.
Command Type
Switch command.
Command Mode
Read-Write.
Usage Guidelines
None.
3-38
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
What It Displays...
Fixed front panel or expansion module slot location
designation. For details on how slots are numbered, refer to
Section
4.1.2.
Number of ports in the fixed front panel or expansion
module.
Model number of the chassis or expansion module.
Serial number (if applicable) of the chassis or expansion
module.
Hardware version number (if applicable) of the chassis or
expansion module.
Current firmware version number (if applicable).
(Optional) Specifies a text string that identifies the system.
A name string containing a space in the text must be
enclosed in quotes as shown in the example below.
Advertisement
Table of Contents
