Table of Contents
Advertisement
Logging and Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
Example
This example shows how to set the server at IP address 10.21.1.100 as an SNTP server
Matrix>set sntp server 10.21.1.100
11.2.4.6 clear sntp server
Use this command to remove one or all servers from the SNTP server list.
clear sntp server {all [ip-address | hostname]}
Syntax Description
all
ip-address |
hostname
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove the server at IP address 10.21.1.100 from SNTP server
Matrix>clear sntp server 10.21.1.100
11-64
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Removes all servers from the SNTP server list.
Specifies the IP address or host name of a server to remove
from the SNTP server list.
:
list:
Advertisement
Table of Contents
